SPECIALTY SAWS, FINECUT SAWS, and GENERAL CARPENTRY SAWS
TAKUMI
- HIGHEST QUALITY JAPANESE TRADITIONAL SAWS
NAILPULLERS, PLYBARS, CROWBARS and HAMMERS
PRUNING SAWS, PRUNING SHEARS and HEDGERS/PRUNERS
SHARKSAWS® - SPECIALTY SAWS, FINECUT SAWS, and GENERAL CARPENTRY SAWS
Thank you. This examplifies the kind of company Shark Corporation is. I will continue to purchase, use and recomend all your products_they are the best! I look foreward to seeing what other new tools you folks will come up with in the future. Christiano
After many years of service I broke the blade and despertly want to replace it. Thank you for your help and thank you for making GREAT saw. Bob, KS
Just a note to tell you how much I like your Rockeater drywall saw. My last one lasted 2 years before it broke. (I use it mainly for notching out 2x4 studs) Unfortunately I couldn't find a new one to replace the broken one so I bought a Stanley Fatmax drywall saw...which broke after less than two weeks.
Sharp!! The best drywall saw there is! Supersharp! A blade cover would help to protect it. highly recommended! as well as other Shark products.
Lethal Weapon The name Rockeater says it all! This saw will tear through drywall before you know it. Watch those fingers! The teeth are big and sharp, requiring little effort to make it go. Just saw at a bit of an angle so the backing paper cuts, not rips, and its smooth sailing. Dragging the blade along the back edge of the cut when finished will take off ragged paper, if any, too. I love the speed of this tool. It really shaves time off drywalling jobs. Thanks, Amazon!
Outstanding ! I have had untold numbers of drywall saws. This is without doubt the very best. It penetrates easier , it cuts faster and is more comfortable to hold. What more could you ask for in a jab saw?
I just wanted to share with you that I have accumulated a large number of
saws including those from my grandfather and father who both enjoyed working
with wood. Out of all of the saws I own, this saw is by far my favorite for
most jobs. It is an incredible tool for everything from cutting plumbing
flush to the floor (especially useful for installing toilet flanges) to cutting
dovetails in two-by stock for outdoor playground projects and
cutting rounded stock where the teeth grab because they are so sharp. Ron Kaplan
Thanks for the quick reply. I bought and tried out the # 10-2410 today - the saw performs beautifully - it is a marvel of engineering. Wonderfully thin and straight kerf (even though I am a novice wood worker). I look forward to tryng the other saws when I get the money. Karen Mosher
I have to be honest with you. I have this Stanley 20-331 pull saw, as well
as several of the Shark Corp Japenese made pull saws. Stanley makes a lot
of nice tools, but this saw is not the one I go for when I want to make a
fine cut. Exactly why the engineering and ergonomics are superior on the
Shark saws I am not sure, but they are. Trying to get an even and smooth
cut on a dowel, or dovetail, the Sharks work better. The Stanley snags on
the workpieces more often.
I'm not saying the Stanley is a bad saw, it just isn't on the level with
the Shark brand.
One item worth mentioning is that it is rather small. The object with these
pull saws is to get the perfect angle and a smooth cut based on the amount
of resistance you place on the workpiece. Once the flow is there, it is beneficial
to have a longer draw with a longer blade. Snags are apt to happen at the
beginning of the cut. So a short stroke, equals the potential for a lot of
snags.
Flush cut pull saws are an art form in their use. Trying to get a perfectly
clean and flush cut without scarring the work surface is a challenge. The
safer way is to slightly overcut it, and use a random orbit sander to take
it down to flush.
The nice thing about the flush cut saws is that they take off a good deal
of material with very little effort. With coarser teeth on one side, and
finer on the other, most applications are covered.
I'm not trying to bash the Stanley, it is not a bad tool, just not the feel
and result of the Shark line. Hope this helps.
Your sharksaw pullsaw is wonderful. Really helped us when we installed our Pergo flooring. Now if we can find a replacement blade that costs LESS than the complete saw, we'll be set! Excellent tool. Real quality. Mike in Northridge, CA
Excellent Saw (10-2204). Jerry O'Brien, AR
Just love the saw-used my neighbors once and had to have my own(10-2312). Haven't used the saw yet, but like the fit of the handle (10-2410). Bill Hurley, FL
I do have a couple of your pull saws and cannot do without when on the job. One has permanent place in my tool box. Thanking you in advance for your reply. Bob
I have used one of your pullsaws for several years. It is fantastic!!!! Unfortunately, I have finally dulled my "Magic Saw". Recently, even in its dulled condition, I was able to do something fanstastic with it. I had just purchased some carpeting. It came from the store all rolled up and sealed in a plastic wrap. I needed to trim about 14 inches off the end of the roll. Instead of unrolling it and using a razor knife, I took my "magic saw" and cut the roll of carpet, while it was still wrapped in plastic. Absolutely amazing!!!! The hardware store I bought it at is no longer in business. Where could I get another locally. John, Virginia
Excellent Saw (10-2204). Just love the saw-used my neighbors once and had to have my own(10-2312). Haven't used the saw yet, but like to fit of the handle (10-2410). John
I purchased your fine cut saw and I love it! Unfortunately my 9 year old did too and now I need a replacement blade. I bought the saw at Lowes in Puyallup Washington but they do not carry replacement blades. Where can I get a new blade close by? Can I buy them from you? look to hear from you soon. Andrew
As a commercial carpenter who does alot of drywall work, I'm always looking for tools that make my job easier and faster. I've used dozens of brands, and styles, of saws for drywall. I've never found a keyhole-type saw that penetrates rock, or cuts as fast, as your #10-2206. It's also the most comfortable saw, of it's type, I've used. George
I've been using your Rockeater saw now for about 2 years. I'm on my second one (the first was stolen). After thousands of cuts, my saw shows little wear, and seems to cut as fast as the day I bought it. Richard, MN
Thanks for making such a fine tool.
A few months ago, I purchased your large Shark Pullsaw and was so impressed, I bought the next size down. Since that time, I have bought every one of your pullsaws and have never used such an accurate and easy to use saw. If you need someone to recommend your product, just give them my name. I could not be more pleased. Paul, UK
TAKUMI - HIGHEST QUALITY JAPANESETRADITIONAL SAWS
This is the saw I was looking for such a long time. Thank you. It's such a pleasure to use such a fine quality tools. Jim NC
Excellent tools!! I knew about Japanese saws but I never used it. I just purchased dozuki saw last week. It's a dream tool. I'll definitely have collection of this line. Martin OH.
SHARKGRIP® - NAILPULLERS, PLYBARS, CROWBARS and HAMMERS
As a contractor, I use these shark's crowbars all the time in my work. Strong but lightweight, these crowbars make demolition easy with a thin tongue at one end and a cat's paw nail puller at the other. They're especially good for separating 2x4s from joints and removing nails and joist hangers. These bars save me a lot of time and money! Wayne
My crew & I use your cats paws everyday and there is nothing better. Please send me a catalog so I can get more and see what else you have to offer. Mike in Woodland, WA
I am the proud ouner of a #21-2220 8" prybar. This item is possibly thegreatest invention since the hammer. It does everything you advertise plus.I have removed complicated moldings that I was told could not be salvaged for reuse, Not only did I do the "impossible" with this tool, I saved the home owner and my self hundreds of $$. I am a very small business owner and oppreciate your products. keep up the great work. Sincerly, Guy W. Julian
I am glad to have found this nail puller. It is one of the most favorite tools in my box. Lester Guinther, Perkasie, PA
These bars work great! I've owned heavier crowbars, but these are so light and strong they're easy to work with. I save time using these crowbars, and that means I save money. Right now I own the 15" and 24" bars and I plan to purchase the rest of the crowbar line. Framer Jim Norman
I collect hammers. I just purchased yours from Amazon.comI was wondering if you were looking for hammer and saw distributers I the Seattle area.BMC West is one of the largest lumber yards in the Northwest and has one of the largest hammer collections of good quality hammers I've seen. Thanks for adding another unique hammer to my collection Bob Simonson
I work at a shipping warehouse and open crates all day every day. My Crowbar is my best friend. The thin tongue makes crate opening a snap and the nail puller is indispensable. I can't live without this crowbar! Dan O'Brien
Question is: Where can I buy a 360 mm nail puller? I have one and it works fine but I want a second. True Value only has in their system the 300 mm size. I wouldn't mind waitiing if you have to order one fromj Japan. Thank you very much. P.S. VAughn makes a very good competitor to yours, but yours is just a bit better. Larry Lewis
YARDSHARK™ - PRUNING SAWS, PRUNING SHEARS and HEDGERS/PRUNERS
Your "Yardshark" folding prunning saw is the fastest and the smoothest cutting saw I have ever used (in 40 years). Now if you would make one with a 12-15 inch blade it would really great, but still keep the 9 points per inch. I really like the way they cut, so some much so, I any using your folding saws on a 10 acre prunning job. Sincerely, Russell Wilkins
Your products are the best of the best - you should distribute them more widely. (62-5237) Francine Iwanski, FL
I have been using one of your Hedge Trimmer for years and have finally worn it out. I have been looking for a replacement for some time and can not find a local dealer that carries your products. I am interested in two of your products, 62-5437 and 62-5457. Please provide the address of one of your dealers who can assist me in purchasing your products.
I am an avid gardner and very fussy about how my yard looks, your hedge trimmer has helped me keep it looking that way. If you are ever looking for genuine, unsolicited user recognition you have my endorsement. You have great products and it is a pleasure using them. Thanks for making tools that not only work, but are easy to work with..... Tom
I used a buddies shark for a while and it felt great! When I can afourd to get one ,it will be mine ,thats the GODS honest truth. Brian NC
Long time ago Ipurchased your prunner. Now Home Depot does not carry your high quality tools. I was so upset. Where can I buy now. Mary Fl.